Registrations

We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.

If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum

Automatic boot opening Mondeo Mk3

From www.FordWiki.co.uk
(Redirected from Talk:How To)
Jump to: navigation, search
The Ford Mondeo hit our roads in 1993, and has consistently been a sales success. Now on its 4th incarnation, it remains a drivers favourite. For more information, visit the Ford Mondeo forum on TalkFord.com, the definitive resource site covering all Fords from the present day to the 1970's.

Fordwiki infobox.png
Overview Guide
Ford Model: Mondeo Mk3
Petrol/Diesel: Diesel
Estimated Cost: £26
Difficulty? Easy
How long does this take? 30 min


Automatic boot opening

First things first you will need a pair of compression spring. I've ordered mine online from www.industrial-springs.com, stock number ST51740. Alternatively you can find them by dimensions :

Abbrev Description Value
Dh Min. hole 19.05 mm
Dd Max shaft 9.52 mm
L0 Free length 114.30 mm
R Spring constant 11.2 N/mm
S1 Optimal service life at F1 28.58 mm
L1 Length at F1 85.73 mm
F1 Force at S1 320.00 N
Sn Max travel 53.72 mm
Ln Max loaded length 60.58 mm
Fn Max force 602.00 N


Vaektojsfj.jpg

Required tools : flat head screw driver, G-clamp, 2xcompression springs, 2 heat shrink tubes (20mm diameter)
Step 1:
Remove boot gas struts by pulling back the retaining clasp. Careful not to remove it completely, just pull them backwards and slide them towards the end. One gas strut is not powerful enough to sustain the tailgate so careful not to get hurt.
Clasp.jpg
Step 2:
Once removed the gas strut use a G-clamp to hold it tight.
Photo1.JPG
Step 3:
Use a tubular shaped tool that would fit the hole in the head of the gas strut ( I've used the handle from a set of Allen keys).
Photo2.JPG


Unscrew the head.
Photo3.JPG
Step 3:
Fit the compression spring and the heat shrink tube.
Photo4.JPG


Step 4:
Screw back the head of the gas strut.
Photo5.JPG
Step 5:
Fit the gas strut on the tailgate and use a lighter to shrink the tube.
Photo6.JPG