Difference between revisions of "Sunroof Reset"

Revision as of 04:12, 2 October 2008

After disconnecting the battery or removing the power plug from the sunroof on the Mk3, you will need to reset the sunroof motor as follows:

Operate the sunroof switch to the up/close position until the sunroof is in the fully open/vent position.
Release the switch.
Operate the switch to the up/close position and hold for 30 seconds until there is a small movement (approximately 2 mm) and the sunroof motor stops.
Release the switch.
Operate the switch to the up/close position again within 0.5 seconds until the sunroof stops (one complete cycle).

@@ Line 2: / Line 2: @@
 # Operate the sunroof switch to the up/close position until the sunroof is in the fully open/vent position.
 # Release the switch.
+# Operate the switch to the up/close position and hold for 30&nbsp;seconds until there is a small movement (approximately 2&nbsp;mm) and the sunroof motor stops.
-# Operate the switch to the up/close position and hold for 30 seconds until there is a small movement (approximately 2 mm) and the sunroof motor stops.
 # Release the switch.
+# Operate the switch to the up/close position again within 0.5&nbsp;seconds until the sunroof stops (one complete cycle).
-# Operate the switch to the up/close position again within 0.5 seconds until the sunroof stops (one complete cycle).
 [[Category:Mk3]]
 [[Category:Electrical]]