Registrations
We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.
If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum
Difference between revisions of "Instrument Cluster Self-Diagnostic Mode"
52graphite (Talk | contribs) (Undo revision 2076 by 89.19.172.22 (Talk)) |
52graphite (Talk | contribs) (→Self-Diagnostic Mode) |
||
| Line 18: | Line 18: | ||
If Self-Diagnostic Mode cannot be accessed use WDS to diagnose instrument cluster. | If Self-Diagnostic Mode cannot be accessed use WDS to diagnose instrument cluster. | ||
| − | == | + | == Available information == |
| − | + | * Gauge test | |
| + | * All LCD are illuminated | ||
| + | * Indicator bulbs | ||
| + | * ROM level | ||
| + | * NVM (ROM) level | ||
| + | * EEPROM level | ||
| + | * DTC. The DTCs stored will be displayed. The DTC codes will scroll through if there is more than one. | ||
| + | * Road speed mph (SP----) | ||
| + | * Road speed km/h (SP----) | ||
| + | * Engine speed rpm (TA----) | ||
| + | * Fuel level sensor (FL----, 010 (empty) - 254 (full)) | ||
| + | * Fuel flow rate (FP ---, hex counter) | ||
| + | * Cylinder head temperature (---C) | ||
| + | * Battery voltage (BA----) | ||
| − | + | There are many other pieces of information not of interest to the end user, but you'll eventually get back round to the gauge sweep. | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
[[Category:Reference]] | [[Category:Reference]] | ||
Revision as of 11:00, 7 January 2009
Contents
Instrument Cluster Self-Diagnostic Mode
Background
This is for the MK3 Mondeo but will also work on the focus and most other Fords with a digital trip meter.
Self-Diagnostic Mode
To enter the instrument cluster Self-Diagnostic Mode simultaneously press and hold the tripmeter reset button and turn the ignition switch to position II.
When TEST is displayed in the LCD release the tripmeter reset button
The instrument cluster will enter the gauge sweep test.
To navigate through or skip any of the instrument cluster Self-Diagnostic Mode tests press the tripmeter RESET button.
The self-test is deactivated when the ignition switch is turned to the OFF position or when the tripmeter reset button is pressed and held for 5 seconds.
If Self-Diagnostic Mode cannot be accessed use WDS to diagnose instrument cluster.
Available information
- Gauge test
- All LCD are illuminated
- Indicator bulbs
- ROM level
- NVM (ROM) level
- EEPROM level
- DTC. The DTCs stored will be displayed. The DTC codes will scroll through if there is more than one.
- Road speed mph (SP----)
- Road speed km/h (SP----)
- Engine speed rpm (TA----)
- Fuel level sensor (FL----, 010 (empty) - 254 (full))
- Fuel flow rate (FP ---, hex counter)
- Cylinder head temperature (---C)
- Battery voltage (BA----)
There are many other pieces of information not of interest to the end user, but you'll eventually get back round to the gauge sweep.
Your Privacy Choices