Registrations

We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.

If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum

Difference between revisions of "Instrument Cluster Self-Diagnostic Mode"

From www.FordWiki.co.uk
Jump to: navigation, search
(FIELD_OTHER)
(→‎Cluster DTCs)
 
(23 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
FIELD_MESSAGE_alc4tpasac
+
{{note|'''The Ford Mondeo hit our roads in 1993, and has consistently been a sales success. Now on its 4th incarnation, it remains a drivers favourite.'''<br>
 +
'''For more information, visit the [http://www.talkford.com/forum/596-mondeo/ Ford Mondeo] forum on [http://www.talkford.com TalkFord.com], the definitive resource site covering all Fords from the present day to the 1970's.'''}}
  
−
== Self-Diagnostic Mode ==
+
----
 +
{{Infobox
 +
|name        = Infobox Template
 +
|bodystyle    = float:right; valign:top;
 +
|image        = [[File:Fordwiki infobox.png]]
 +
|imagestyle  =
 +
|caption      = Overview Guide
 +
|captionstyle =
 +
|headerstyle  = background:#ccf;
 +
|labelstyle  = background:#ddf;
 +
|datastyle    = text-align:right;
 +
|header2 =
 +
|label2  = Ford Model:
 +
|data2  = '''Mondeo/Focus'''
 +
|header3 =
 +
|label3  = Estimated Cost:
 +
|data3  = '''zero'''
 +
|header4 =
 +
|label4  = Difficulty?
 +
|data4  = '''Easy'''
 +
|label5  = How long does this take?
 +
|data5  = '''5 minutes'''
 +
}}
  
−
To enter the instrument cluster Self-Diagnostic Mode simultaneously press and hold the tripmeter reset button and turn the ignition switch to position II.
+
== Applicability ==
  
−
When TEST is displayed in the LCD release the tripmeter reset button
+
This is for the MK3 Mondeo but will also work on the Focus (Mk1 and Mk2) and most other Ford vehicles with a digital trip meter.
  
−
The instrument cluster will enter the gauge sweep test.
+
== Entering Self-Diagnostic Mode ==
  
−
To navigate through or skip any of the instrument cluster Self-Diagnostic Mode tests press the tripmeter RESET button.  
+
To enter the instrument cluster Self-Diagnostic Mode simultaneously press and hold the tripmeter reset button and turn the ignition switch to position II.  
  
−
The self-test is deactivated when the ignition switch is turned to the OFF position or when the tripmeter reset button is pressed and held for 5 seconds.  
+
When tESt is displayed in the LCD release the button.
  
−
If Self-Diagnostic Mode cannot be accessed use WDS to diagnose instrument cluster.
+
The instrument cluster will enter the gauge sweep test.  
−
 
+
−
=== Note ===
+
−
 
+
−
Additional tests are available after the following but are not applicable for this diagnostic.  
+
−
 
+
−
=== Self - Diagnostic Mode ===
+
−
 
+
−
Gauge
+
−
 
+
−
All LCD are illuminated
+
−
 
+
−
Indicator bulbs
+
−
 
+
−
ROM level
+
  
−
NVM (ROM) level
+
To navigate through the Self-Diagnostic Mode tests press the tripmeter RESET button repeatedly as required.
  
−
EEPROM level
+
The self-test is deactivated when the ignition switch is turned to the OFF position or when the tripmeter reset button is pressed and held for 5 seconds.
  
−
DTC. The DTCs stored will be displayed. The DTC codes will scroll through if there is more
+
== Available information ==
−
than one.
+
  
−
Road speed m.p.h.
+
Your car may differ from these slightly in content and sequence:
  
−
Road speed Km/h  
+
* Gauge test
 +
* All LCD are illuminated
 +
* Indicator bulbs
 +
* ROM level (r----)
 +
* NVM (EEPROM) level (Er----) - this (e.g. Er0206) is often mistakenly assumed to be an error code!
 +
* DTC revision level (dtC985)
 +
* DTC. The DTCs stored will be displayed. The DTC codes will scroll through if there is more than one, or "nOnE" if there are none. See below for interpretation.
 +
* Road speed mph (SP----)
 +
* Road speed km/h (SP----)
 +
* Averaged speed, some sort of hex reading (S60---), probably not useful to the end user.
 +
* Engine speed rpm (TA----)
 +
* Averaged tacho signal, some sort of hex reading (T60---), probably not useful to the end user.
 +
* Odometer counter (od ---)
 +
* Fuel level sensor (F ---, 010 (empty) - 254 (full))
 +
* Averaged fuel level (F60---, range as above)
 +
* Fuel flow rate (FL  --, hex counter)
 +
* Fuel percentage/remaining? Hex? (FP  --)
 +
* Cylinder head temperature (---C)
 +
* Battery voltage (bAt---)
  
−
Engine speed
+
There are many other pieces of information not of interest to the end user, but you'll eventually get back round to the gauge sweep.
  
−
Fuel volume Fuel level sensor
+
== Cluster DTCs ==
  
−
ECT/CHT
+
To read the [[OBDII fault codes|complete list of codes]], you'll need a dedicated fault code reader plugged into the diagnostic port. Some codes are available via the cluster, listed under the DTC entry described above. These are:
  
−
Battery voltage  
+
* 115A (P115A) Low Fuel Level - Forced Limited Power
 +
* 115B (P115B) Low Fuel Level - Forced Engine Shutdown
 +
* 9202 (B1202) Fuel pump and sender unit/fuel level sensor open circuit
 +
* 9204 (B1204) Fuel pump and sender unit/fuel level sensor short to ground
 +
* 9317 (B1317) Battery voltage high (greater than 16V)
 +
* 9318 (B1318) Battery voltage low (less than 10V)
 +
* 9342 (B1342) PCM is defective
 +
* 9342 (B1342) Odometer RESET button sticking
 +
* 9342 (B1342) Trip computer SET button sticking
 +
* 9342 (B1342) NVM memory failure
 +
* A286 (B2286) MODE switch sticking
 +
* 9359 (B1359) Ignition run/accessory circuit failure
 +
* A477 (B2477) Module configuration failure
 +
* D262 (U1262) Communication bus fault (missing CAN messages)
 +
* E196 (U2196) Invalid data for engine RPM (Invalid CAN message)
 +
* E197 (U2197) Invalid data for vehicle speed (Invalid CAN message)
 +
* E198 (U2198) Invalid data for fuel pulse (Invalid CAN message)
 +
* E199 (U2199) Invalid data for engine coolant temperature (Invalid CAN message)
 +
* E200 (U2200) Invalid data for odometer (Invalid CAN message)
 +
* E201 (U2201) Invalid data for ambient temperature (Invalid CAN message)
  
−
Submitted by michael@meuer.com
 
  
−
[[Category:Reference]]
+
[[Category:Mondeo_Mk3]]
−
[[Category:Mk3]]
+
[[Category:Mondeo_Mk4]]
−
[[Category:Petrol]]
+
[[Category:Focus_Mk1]]
−
[[Category:Diesel]]
+
[[Category:Focus_Mk2]]
−
[[Category:4 Cylinder]]
+
−
[[Category:V6]]
+
−
[[Category:Tips]]
+

Latest revision as of 09:15, 13 December 2010

The Ford Mondeo hit our roads in 1993, and has consistently been a sales success. Now on its 4th incarnation, it remains a drivers favourite.
For more information, visit the Ford Mondeo forum on TalkFord.com, the definitive resource site covering all Fords from the present day to the 1970's.
Fordwiki infobox.png
Overview Guide
Ford Model: Mondeo/Focus
Estimated Cost: zero
Difficulty? Easy
How long does this take? 5 minutes
v • d • e

Applicability

This is for the MK3 Mondeo but will also work on the Focus (Mk1 and Mk2) and most other Ford vehicles with a digital trip meter.

Entering Self-Diagnostic Mode

To enter the instrument cluster Self-Diagnostic Mode simultaneously press and hold the tripmeter reset button and turn the ignition switch to position II.

When tESt is displayed in the LCD release the button.

The instrument cluster will enter the gauge sweep test.

To navigate through the Self-Diagnostic Mode tests press the tripmeter RESET button repeatedly as required.

The self-test is deactivated when the ignition switch is turned to the OFF position or when the tripmeter reset button is pressed and held for 5 seconds.

Available information

Your car may differ from these slightly in content and sequence:

  • Gauge test
  • All LCD are illuminated
  • Indicator bulbs
  • ROM level (r----)
  • NVM (EEPROM) level (Er----) - this (e.g. Er0206) is often mistakenly assumed to be an error code!
  • DTC revision level (dtC985)
  • DTC. The DTCs stored will be displayed. The DTC codes will scroll through if there is more than one, or "nOnE" if there are none. See below for interpretation.
  • Road speed mph (SP----)
  • Road speed km/h (SP----)
  • Averaged speed, some sort of hex reading (S60---), probably not useful to the end user.
  • Engine speed rpm (TA----)
  • Averaged tacho signal, some sort of hex reading (T60---), probably not useful to the end user.
  • Odometer counter (od ---)
  • Fuel level sensor (F ---, 010 (empty) - 254 (full))
  • Averaged fuel level (F60---, range as above)
  • Fuel flow rate (FL --, hex counter)
  • Fuel percentage/remaining? Hex? (FP --)
  • Cylinder head temperature (---C)
  • Battery voltage (bAt---)

There are many other pieces of information not of interest to the end user, but you'll eventually get back round to the gauge sweep.

Cluster DTCs

To read the complete list of codes, you'll need a dedicated fault code reader plugged into the diagnostic port. Some codes are available via the cluster, listed under the DTC entry described above. These are:

  • 115A (P115A) Low Fuel Level - Forced Limited Power
  • 115B (P115B) Low Fuel Level - Forced Engine Shutdown
  • 9202 (B1202) Fuel pump and sender unit/fuel level sensor open circuit
  • 9204 (B1204) Fuel pump and sender unit/fuel level sensor short to ground
  • 9317 (B1317) Battery voltage high (greater than 16V)
  • 9318 (B1318) Battery voltage low (less than 10V)
  • 9342 (B1342) PCM is defective
  • 9342 (B1342) Odometer RESET button sticking
  • 9342 (B1342) Trip computer SET button sticking
  • 9342 (B1342) NVM memory failure
  • A286 (B2286) MODE switch sticking
  • 9359 (B1359) Ignition run/accessory circuit failure
  • A477 (B2477) Module configuration failure
  • D262 (U1262) Communication bus fault (missing CAN messages)
  • E196 (U2196) Invalid data for engine RPM (Invalid CAN message)
  • E197 (U2197) Invalid data for vehicle speed (Invalid CAN message)
  • E198 (U2198) Invalid data for fuel pulse (Invalid CAN message)
  • E199 (U2199) Invalid data for engine coolant temperature (Invalid CAN message)
  • E200 (U2200) Invalid data for odometer (Invalid CAN message)
  • E201 (U2201) Invalid data for ambient temperature (Invalid CAN message)
Retrieved from "https://www.fordwiki.co.uk/index.php?title=Instrument_Cluster_Self-Diagnostic_Mode&oldid=5023"