Registrations

We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.

If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum

Difference between revisions of "Water Ingress"

From www.FordWiki.co.uk
Jump to: navigation, search
(New page: Water Ingress If your Mondeo suffers from water in the boot, you might be able to identify the leak by checking the following areas: Rear light clusters - the seals tend to go on these...)
 
Line 1: Line 1:
Water Ingress
+
== Water Ingress ==
  
 +
=== Background ===
 
If your Mondeo suffers from water in the boot, you might be able to identify the leak by checking the following areas:  
 
If your Mondeo suffers from water in the boot, you might be able to identify the leak by checking the following areas:  
  
 +
== Method ==
 +
 +
=== Rear light clusters ===
 +
 +
The seals tend to go on these with Mk2 Mondeos (and Mk1, to a lesser extent).
 +
 +
Simply replace or use silicone filler
 +
 +
=== Air Vent ===
  
Rear light clusters - the seals tend to go on these with Mk2 Mondeos (and Mk1, to a lesser extent). Simply replace or use silicone filler
 
 
The air vent above the rear wheel arches - the membrane may have come away  
 
The air vent above the rear wheel arches - the membrane may have come away  
 +
 +
=== Roof Trim ===
 +
 
The roof trim rails where the roof rack fits - water can get in here and run down the C pillar  
 
The roof trim rails where the roof rack fits - water can get in here and run down the C pillar  
 +
 +
=== Passenger Footwell ===
  
 
A leaking passenger footwell is quite possibly caused by a leaking pollen (or cabin) filter. The gasket around the base of the holder attached to the bulkhead goes hard and lets water in. Also, if the cover isn't on the holder properly, or if the filter is incorrectly fitted then water will leak in...  
 
A leaking passenger footwell is quite possibly caused by a leaking pollen (or cabin) filter. The gasket around the base of the holder attached to the bulkhead goes hard and lets water in. Also, if the cover isn't on the holder properly, or if the filter is incorrectly fitted then water will leak in...  
  
 +
== Mk3 ==
  
 
On a Mk3 Mondeo, water ingress can also be caused by the foam insulating panel (between the interior door panel and the actual door itself) coming unstuck. There are two ways to fix this:  
 
On a Mk3 Mondeo, water ingress can also be caused by the foam insulating panel (between the interior door panel and the actual door itself) coming unstuck. There are two ways to fix this:  
 
  
 
Using a hair dryer, try to reactivate the black sticky sealant, and reseal.  
 
Using a hair dryer, try to reactivate the black sticky sealant, and reseal.  
Line 18: Line 32:
  
 
Submitted by Monkeyra, funkyg, vince_121, ST_Willie and FlashBastd
 
Submitted by Monkeyra, funkyg, vince_121, ST_Willie and FlashBastd
 +
 +
[[Category:Styling]]

Revision as of 20:01, 8 March 2007

Water Ingress

Background

If your Mondeo suffers from water in the boot, you might be able to identify the leak by checking the following areas:

Method

Rear light clusters

The seals tend to go on these with Mk2 Mondeos (and Mk1, to a lesser extent).

Simply replace or use silicone filler

Air Vent

The air vent above the rear wheel arches - the membrane may have come away

Roof Trim

The roof trim rails where the roof rack fits - water can get in here and run down the C pillar

Passenger Footwell

A leaking passenger footwell is quite possibly caused by a leaking pollen (or cabin) filter. The gasket around the base of the holder attached to the bulkhead goes hard and lets water in. Also, if the cover isn't on the holder properly, or if the filter is incorrectly fitted then water will leak in...

Mk3

On a Mk3 Mondeo, water ingress can also be caused by the foam insulating panel (between the interior door panel and the actual door itself) coming unstuck. There are two ways to fix this:

Using a hair dryer, try to reactivate the black sticky sealant, and reseal. Use regular silicon sealant (no-one will ever see it) and do the same.

Submitted by Monkeyra, funkyg, vince_121, ST_Willie and FlashBastd