Registrations
We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.
If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum
Difference between revisions of "Instrument Cluster Self-Diagnostic Mode"
(New page: Instrument Cluster Self-Diagnostic Mode This is for the MK3? Mondeo but will also work on the focus and most other Fords with a digital trip meter. Self-Diagnostic Mode To enter the in...) |
|||
| Line 1: | Line 1: | ||
| − | Instrument Cluster Self-Diagnostic Mode | + | == Instrument Cluster Self-Diagnostic Mode == |
| − | + | ||
| + | === Background === | ||
| + | This is for the MK3? Mondeo but will also work on the focus and most other Fords with a digital trip meter. | ||
| − | Self-Diagnostic Mode | + | == Self-Diagnostic Mode == |
To enter the instrument cluster Self-Diagnostic Mode simultaneously press and hold the tripmeter reset button and turn the ignition switch to position II. | To enter the instrument cluster Self-Diagnostic Mode simultaneously press and hold the tripmeter reset button and turn the ignition switch to position II. | ||
| + | |||
When TEST is displayed in the LCD release the tripmeter reset button | When TEST is displayed in the LCD release the tripmeter reset button | ||
| + | |||
The instrument cluster will enter the gauge sweep test. | The instrument cluster will enter the gauge sweep test. | ||
| + | |||
To navigate through or skip any of the instrument cluster Self-Diagnostic Mode tests press the tripmeter RESET button. | To navigate through or skip any of the instrument cluster Self-Diagnostic Mode tests press the tripmeter RESET button. | ||
| + | |||
The self-test is deactivated when the ignition switch is turned to the OFF position or when the tripmeter reset button is pressed and held for 5 seconds. | The self-test is deactivated when the ignition switch is turned to the OFF position or when the tripmeter reset button is pressed and held for 5 seconds. | ||
| + | |||
If Self-Diagnostic Mode cannot be accessed use WDS to diagnose instrument cluster. | If Self-Diagnostic Mode cannot be accessed use WDS to diagnose instrument cluster. | ||
| − | Note | + | === Note === |
| − | + | ||
| + | Additional tests are available after the following but are not applicable for this diagnostic. | ||
| + | |||
| + | === Self - Diagnostic Mode === | ||
Gauge | Gauge | ||
| + | |||
All LCD are illuminated | All LCD are illuminated | ||
| + | |||
Indicator bulbs | Indicator bulbs | ||
| + | |||
ROM level | ROM level | ||
| + | |||
NVM (ROM) level | NVM (ROM) level | ||
| + | |||
EEPROM level | EEPROM level | ||
| − | DTC. The DTCs? stored will be displayed. The DTC codes will scroll through if there is more than one. | + | |
| + | DTC. The DTCs? stored will be displayed. The DTC codes will scroll through if there is more | ||
| + | than one. | ||
| + | |||
Road speed m.p.h. | Road speed m.p.h. | ||
| + | |||
Road speed Km/h | Road speed Km/h | ||
| + | |||
Engine speed | Engine speed | ||
| + | |||
Fuel volume Fuel level sensor | Fuel volume Fuel level sensor | ||
| + | |||
ECT/CHT | ECT/CHT | ||
| + | |||
Battery voltage | Battery voltage | ||
Submitted by toyo | Submitted by toyo | ||
| + | |||
| + | [[Category:Reference]] | ||
Revision as of 12:18, 9 March 2007
Contents
Instrument Cluster Self-Diagnostic Mode
Background
This is for the MK3? Mondeo but will also work on the focus and most other Fords with a digital trip meter.
Self-Diagnostic Mode
To enter the instrument cluster Self-Diagnostic Mode simultaneously press and hold the tripmeter reset button and turn the ignition switch to position II.
When TEST is displayed in the LCD release the tripmeter reset button
The instrument cluster will enter the gauge sweep test.
To navigate through or skip any of the instrument cluster Self-Diagnostic Mode tests press the tripmeter RESET button.
The self-test is deactivated when the ignition switch is turned to the OFF position or when the tripmeter reset button is pressed and held for 5 seconds.
If Self-Diagnostic Mode cannot be accessed use WDS to diagnose instrument cluster.
Note
Additional tests are available after the following but are not applicable for this diagnostic.
Self - Diagnostic Mode
Gauge
All LCD are illuminated
Indicator bulbs
ROM level
NVM (ROM) level
EEPROM level
DTC. The DTCs? stored will be displayed. The DTC codes will scroll through if there is more than one.
Road speed m.p.h.
Road speed Km/h
Engine speed
Fuel volume Fuel level sensor
ECT/CHT
Battery voltage
Submitted by toyo
Your Privacy Choices