Difference between revisions of "Airbag Flash Codes"

Latest revision as of 04:14, 3 March 2011

lots of airbag flash code questions are popping up of late so i have stuck this info in here so its easier to find as my old post with it all in is getting harder to find  :}

When an error occurs, your warning light may flash a code, made up of a flash sequence, a pause, then another sequence. Count the flashes in each sequence and use the flash code to find the associated cause below. For example, four flashes then nine gives a flash code of 49.

Symptom Chart

No communication with the module

Possible Source(s):

• Fuse.
• DLC.
• Circuit(s).
• Air bag control module.

DTC B1231: Longitudinal acceleration threshold exceeded. Lamp flash code: 13

Possible Source(s):

• Crash data memory full.

Action(s) to take:

• Data cannot be cleared with WDS. INSTALL a new air bag control module. For additional information, refer to «Air Bag Control Module(501-20 Supplemental Restraint System)» in this Section. REPEAT the self-test, CLEAR the DTCs.

DTC B1317: Battery voltage high. Lamp flash code: continuous

Possible Source(s):

• Charging system.

Action(s) to take:

• Check the charging system. For additional information, refer to «Section 414-00».[Battery Charging(414-00 Charging System - General Information)] REPEAT the self-test, CLEAR the DTCs.

DTC B1318: Battery voltage low. Lamp flash code: continuous

Possible Source(s):

• Battery.
• Charging system.
• Circuit.

DTC B1342: Air bag control module is defective. Lamp flash code: 12

Possible Source(s):

• Air bag control module.

Action(s) to take:

• INSTALL a new air bag control module. For additional information, refer to «Air Bag Control Module(501-20 Supplemental Restraint System)» in this Section. REPEAT the self-test, CLEAR the DTCs.

DTC B1869: Air bag warning indicator open circuit or short to ground. Lamp flash code: continuous

Possible Source(s):

• Circuit(s).
• Instrument cluster.
• Air bag control module.

DTC B1870: Air bag warning indicator short to battery. Lamp flash code: continuous

Possible Source(s):

• Circuit.
• Instrument cluster.

DTC 1884: Passenger air bag deactivation indicator inoperative. Lamp flash code: 18

Possible Source(s):

• Circuit(s).
• Air bag control module.
• Passenger air bag deactivation indicator.

DTC B1890: Passenger air bag deactivation indicator short to battery. Lamp flash code: 18

Possible Source(s):

• Circuit(s).
• Passenger air bag deactivation indicator.

DTC B1891: Air bag tone warning indicator short to battery. Lamp flash code: 53

Possible Source(s):

• Air bag control module internal fault.

Action(s) to take:

• INSTALL a new air bag control module. For additional information, refer to «Air Bag Control Module(501-20 Supplemental Restraint System)» in this Section. REPEAT the self-test, CLEAR the DTCs.

DTC B1892: Air bag tone warning indicator circuit fault. Lamp flash code: 53

Possible Source(s):

• Air bag control module internal fault.

Action(s) to take:

• INSTALL a new air bag control module. For additional information, refer to «Air Bag Control Module(501-20 Supplemental Restraint System)» in this Section. REPEAT the self-test, CLEAR the DTCs.

DTC B1921: Air bag diagnostic monitor ground circuit open. Lamp flash code: 14

Possible Source(s):

• Air bag control module internal fault.

Action(s) to take:

• INSTALL a new air bag control module. For additional information, refer to «Air Bag Control Module(501-20 Supplemental Restraint System)» in this Section. REPEAT the self-test, CLEAR the DTCs.

DTC B2290 Error value 27: Occupant Classification System module fault. Lamp flash code: 16

Possible Source(s):

• Occupant classification sensor module.

Action(s) to take:

• INSTALL a new passenger seat cushion. For additional information, refer to «Section 501-10».[Front Seat Cushion(501-10 Seating)] REPEAT the self-test, CLEAR the DTCs.

DTC B2290 Error value 26: Occupant Classification System communications fault. Lamp flash code: 16

Possible Source(s):

• Circuit(s).

DTC B2290 Error value 25: Occupant Classification System calibration fault. Lamp flash code: 16

Possible Source(s):

• Occupant classification sensor module.

Action(s) to take:

• INSTALL a new passenger seat cushion. For additional information, refer to «Section 501-10».[Front Seat Cushion(501-10 Seating)] REPEAT the self-test, CLEAR the DTCs.

DTC B2290 Error value 24: Occupant Classification System sensing element fault. Lamp flash code: 16

Possible Source(s):

• Occupant classification sensor.

Action(s) to take:

• INSTALL a new passenger seat cushion. For additional information, refer to «Section 501-10».[Front Seat Cushion(501-10 Seating)] REPEAT the self-test, CLEAR the DTCs.

DTC B2292 Error value 31: Driver safety belt pretensioner circuit low resistance. Lamp flash code: 33

Possible Source(s):

• Circuit(s).
• Driver safety belt pretensioner.

DTC B2292 Error value 30: Driver safety belt pretensioner open circuit. Lamp flash code: 33

Possible Source(s):

• Circuit(s).
• Driver safety belt pretensioner.

DTC B2292 Error value 29: Driver safety belt pretensioner short to battery. Lamp flash code: 33

Possible Source(s):

• Circuit(s).

DTC B2292 Error value 28: Driver safety belt pretensioner short to ground. Lamp flash code: 33

Possible Source(s):

• Circuit(s).
• Driver safety belt pretensioner.

DTC B2292 Error value 27: Passenger safety belt pretensioner circuit low resistance. Lamp flash code: 34

Possible Source(s):

• Circuit(s).
• Passenger safety belt pretensioner.

DTC B2292 Error value 26: Passenger safety belt pretensioner open circuit. Lamp flash code: 34

Possible Source(s):

• Circuit(s).
• Passenger safety belt pretensioner.

DTC B2292 Error value 25: Passenger safety belt pretensioner short to battery. Lamp flash code: 34

Possible Source(s):

• Circuit(s).
• Passenger safety belt pretensioner.

DTC B2292 Error value 24: Passenger safety belt pretensioner short to ground. Lamp flash code: 34

Possible Source(s):

• Circuit(s).
• Passenger safety belt pretensioner.

DTC B2293 Error value 31: Driver air bag first stage short to ground. Lamp flash code: 19

Possible Source(s):

• Driver air bag module.
• Clockspring.
• Circuit(s).

DTC B2293 Error value 30: Driver air bag first stage short to battery. Lamp flash code: 19

Possible Source(s):

• Clockspring.
• Circuit(s).

DTC B2293 Error value 29: Driver air bag first stage open circuit. Lamp flash code: 19

Possible Source(s):

• Driver air bag module.
• Clockspring.
• Circuit(s).

DTC B2293 Error value 28: Driver air bag first stage circuit low resistance. Lamp flash code: 19

Possible Source(s):

• Driver air bag module.
• Clockspring.
• Circuit(s).

DTC B2293 Error value 27: Passenger air bag first stage short to ground. Lamp flash code: 21

Possible Source(s):

• Passenger air bag module.
• Circuit(s).

DTC B2293 Error value 26: Passenger air bag first stage short to battery. Lamp flash code: 21

Possible Source(s):

• Circuit(s).

DTC B2293 Error value 25: Passenger air bag first stage open circuit. Lamp flash code: 21

Possible Source(s):

• Passenger air bag module.
• Circuit(s).

DTC B2293 Error value 24: Passenger air bag first stage circuit low resistance. Lamp flash code: 21

Possible Source(s):

• Passenger air bag module.
• Circuit(s).

DTC B2293 Error value 23: Driver air bag second stage short to ground. Lamp flash code: 19

Possible Source(s):

• Driver air bag module.
• Clockspring.
• Circuit(s).

DTC B2293 Error value 22: Driver air bag second stage short to battery. Lamp flash code: 19

Possible Source(s):

• Clockspring.
• Circuit(s).

DTC B2293 Error value 21: Driver air bag second stage open circuit. Lamp flash code: 19

Possible Source(s):

• Driver air bag module.
• Clockspring.
• Circuit(s).

DTC B2293 Error value 20: Driver air bag second stage circuit low resistance. Lamp flash code: 19

Possible Source(s):

• Driver air bag module.
• Clockspring.
• Circuit(s).

DTC B2293 Error value 19: Passenger air bag second stage short to ground. Lamp flash code: 21

Possible Source(s):

• Passenger air bag module.
• Circuit(s).

DTC B2293 Error value 18: Passenger air bag second stage short to battery. Lamp flash code: 21

Possible Source(s):

• Circuit(s).

DTC B2293 Error value 17: Passenger air bag second stage open circuit. Lamp flash code: 21

Possible Source(s):

• Passenger air bag module.
• Circuit(s).

DTC B2293 Error value 16: Passenger air bag second stage circuit low resistance. Lamp flash code: 21

Possible Source(s):

• Passenger air bag module.
• Circuit(s).

DTC B2294 Error value 31: Driver side air curtain circuit short to battery. Lamp flash code: 24

Possible Source(s):

• Circuit(s).

DTC B2294 Error value 30: Driver side air curtain circuit short to ground. Lamp flash code: 24

Possible Source(s):

• Driver side air curtain module.
• Circuit(s).

DTC B2294 Error value 29: Driver side air curtain circuit open circuit. Lamp flash code: 24

Possible Source(s):

• Driver side air curtain module.
• Circuit(s).

DTC B2294 Error value 28: Driver side air curtain circuit low resistance on squib. Lamp flash code: 24

Possible Source(s):

• Driver side air curtain module.
• Circuit(s).

DTC B2294 Error value 27: Passenger side air curtain circuit short to battery. Lamp flash code: 25

Possible Source(s):

• Circuit(s).

DTC B2294 Error value 26: Passenger side air curtain circuit short to ground. Lamp flash code: 25

Possible Source(s):

• Passenger side air curtain module.
• Circuit(s).

DTC B2294 Error value 25: Passenger side air curtain circuit open circuit. Lamp flash code: 25

Possible Source(s):

• Passenger side air curtain module.
• Circuit(s).

DTC B2294 Error value 24: Passenger side air curtain circuit low resistance on squib. Lamp flash code: 25

Possible Source(s):

• Passenger side air curtain module.
• Circuit(s).

DTC B2295 Error value 31: Driver side air bag circuit short to battery. Lamp flash code: 22

Possible Source(s):

• Circuit(s).

DTC B2295 Error value 30: Driver side air bag circuit short to ground. Lamp flash code: 22

Possible Source(s):

• Driver side air bag module.
• Circuit(s).

DTC B2295 Error value 29: Driver side air bag circuit open circuit. Lamp flash code: 22

Possible Source(s):

• Driver side air bag module.
• Circuit(s).

DTC B2295 Error value 28: Driver side air bag circuit low resistance on squib. Lamp flash code: 22

Possible Source(s):

• Driver side air bag module.
• Circuit(s).

DTC B2295 Error value 27: Passenger side air bag circuit short to battery. Lamp flash code: 23

Possible Source(s):

• Circuit(s).

DTC B2295 Error value 26: Passenger side air bag circuit short to ground. Lamp flash code: 23

Possible Source(s):

• Passenger side air bag module.
• Circuit(s).

DTC B2295 Error value 25: Passenger side air bag circuit open circuit. Lamp flash code: 23

Possible Source(s):

• Passenger side air bag module.
• Circuit(s).

DTC B2295 Error value 24: Passenger side air bag circuit low resistance on squib. Lamp flash code: 23

Possible Source(s):

• Passenger side air bag module.
• Circuit(s).

DTC B2296 Error value 31: Driver side impact sensor communications fault. Lamp flash code: 43

Possible Source(s):

• Circuit(s).

DTC B2296 Error value 30: Driver side impact sensor internal fault. Lamp flash code: 43

Possible Source(s):

• Driver side impact sensor.

Action(s) to take:

• INSTALL a new driver side impact sensor. For additional information, refer to «Side Impact Sensor(501-20 Supplemental Restraint System)» in this Section. REPEAT the self-test, CLEAR the DTCs.

DTC B2296 Error value 29: Passenger side impact sensor communications fault. Lamp flash code: 44

Possible Source(s):

• Circuit(s).

DTC B2296 Error value 28: Passenger side impact sensor internal fault. Lamp flash code: 44

Possible Source(s):

• Passenger side impact sensor.

Action(s) to take:

• INSTALL a new passenger side impact sensor. For additional information, refer to «Side Impact Sensor(501-20 Supplemental Restraint System)» in this Section. REPEAT the self-test, CLEAR the DTCs.

DTC B2296 Error value 19: Crash sensor communications fault. Lamp flash code: 42

Possible Source(s):

• Circuit(s).

DTC B2296 Error value 18: Crash sensor internal fault. Lamp flash code: 42

Possible Source(s):

• Crash sensor.

Action(s) to take:

• INSTALL a new crash sensor. For additional information, refer to «Crash Sensor(501-20 Supplemental Restraint System)» in this Section. REPEAT the self-test, CLEAR the DTCs.

DTC B2434: Driver safety belt buckle switch short circuit to ground. Lamp flash code: 51

Possible Source(s):

• Driver safety belt buckle switch.
• Circuit(s).

DTC B2435: Driver safety belt buckle switch resistance out of range. Lamp flash code: 51

Possible Source(s):

• Driver safety belt buckle switch.
• Circuit(s).

DTC B2438: Passenger safety belt buckle switch short circuit to ground. Lamp flash code: 52

Possible Source(s):

• Passenger safety belt buckle switch.
• Circuit(s).

DTC B2439: Passenger safety belt buckle switch resistance out of range. Lamp flash code: 52

Possible Source(s):

• Passenger safety belt buckle switch.
• Circuit(s).

DTC B2477: Air bag control module configuration failure. Lamp flash code: 54

Possible Source(s):

• Air bag control module.

Action(s) to take:

• CONFIGURE the air bag control module. REFER to WDS. REPEAT the self-test, CLEAR the DTCs.

DTC B2691: Driver safety belt buckle switch open circuit or short to battery. Lamp flash code: 51

Possible Source(s):

• Driver safety belt buckle switch.
• Circuit(s).

DTC B2692: Passenger safety belt buckle switch open circuit short to battery. Lamp flash code: 52

Possible Source(s):

• Passenger safety belt buckle switch.
• Circuit(s).

DTC C1414: Incorrect Module Design Level. Lamp flash code: 15

Possible Source(s):

• Air bag control module.

Action(s) to take:

• INSTALL a new air bag control module. For additional information, refer to «Air Bag Control Module(501-20 Supplemental Restraint System)» in this Section. REPEAT the self-test, CLEAR the DTCs.

DTC C1947: Seat position sensor short circuit to ground or battery. Lamp flash code: 49

Possible Source(s):

• Seat position sensor.
• Circuit(s).

DTC C1948: Seat position sensor resistance out of range. Lamp flash code: 49

Possible Source(s):

• Seat position sensor.
• Circuit(s).

DTC C1981: Seat position sensor open circuit. Lamp flash code: 49

Possible Source(s):

• Seat position sensor.
• Circuit(s).

Air bag control module disconnected or inoperative. Lamp flash code: continuous

Possible Source(s):

• Air bag control module
• Circuit(s).

Submitted By Compuwiz_uk