Registrations

We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.

If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum

Difference between revisions of "Rear Bumper Removal"

From www.FordWiki.co.uk
Jump to: navigation, search
m
Line 9: Line 9:
 
(Written in a post by DJAZS, submitted by 52graphite. Feel free to expand with further clarification, pictures, estate instructions etc.)
 
(Written in a post by DJAZS, submitted by 52graphite. Feel free to expand with further clarification, pictures, estate instructions etc.)
  
[[Category:Mk3]]
+
[[Category:Mondeo_Mk3]]

Revision as of 12:45, 8 June 2009

These instructions apply to the hatchback and saloon versions.

  • Remove the fixings on the rear wheelarch liners to enable you to pull the liners away where they meet the rear bumper. The easiest way to do this is to have the rear of the car on stands and the back wheels removed but this isn't essential.
  • When you pull the liners back you will reveal the screws securing the bumper, 2 each side - remove these.
  • Crawl under the car and you will see some metal pressed steel nuts which hold the underside of the bumper to the spare wheel well. These should come off quite easily.
  • Open the boot and there are two TORX screws, one each side, near to the tail lights - take these out.
  • Now unclip the bumper at the sides and it will just pull off.

(Written in a post by DJAZS, submitted by 52graphite. Feel free to expand with further clarification, pictures, estate instructions etc.)