Registrations
We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.
If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum
Difference between revisions of "Instrument Cluster Self-Diagnostic Mode - Mk4"
(New page: == Instrument Cluster Self-Diagnostic Mode == 1. To enter the instrument cluster Self-Diagnostic Mode. Simultaneously press and hold the OK button and turn the ignition switch from positi...) |
|||
| Line 14: | Line 14: | ||
[[Category:Mk4]] | [[Category:Mk4]] | ||
| + | [[Category:Tips]] | ||
| + | [[Category:Electrical]] | ||
Revision as of 14:33, 29 November 2008
Instrument Cluster Self-Diagnostic Mode
1. To enter the instrument cluster Self-Diagnostic Mode. Simultaneously press and hold the OK button and turn the ignition switch from position 0, to position II.
2. Entry to the Self-Diagnostic Mode is confirmed when 'TEST' is displayed in the information and message center display. The set button must be released within three seconds of 'TEST' being displayed or the instrument cluster will exit the Self-Diagnostic Mode.
3. To navigate through or skip any of the instrument cluster Self-Diagnostic Mode tests, press the OK button. If the OK button is pressed for more than 3 seconds between tests, the instrument cluster will exit the Self-Diagnostic Mode.
4. The Self-Diagnostic Mode is deactivated when the ignition switch is turned to the OFF position or low battery voltage is detected.
5. If input data to the instrument cluster is missing or invalid, the information and message center will display '----'
Thanks to rickster
Your Privacy Choices