Registrations
We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.
If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum
Difference between revisions of "Touchscreen Sat Nav Diagnostics - Basic Checks"
m (moved Touchscreen Sat Nav Diagnostics to Touchscreen Sat Nav Diagnostics - Basic Checks: Bring information toggether) |
|
(No difference)
| |
Revision as of 04:48, 25 March 2011
For more information, visit the Ford Mondeo forum on TalkFord.com, the definitive resource site covering all Fords from the present day to the 1970's.
 Overview Guide | |
| Ford Model: | Mondeo |
|---|---|
| Petrol/Diesel: | ???? |
| Estimated Cost: | ???? |
| Difficulty? | ???? |
| How long does this take? | ???? |
Touchscreen Sat Nav Information
This information is meant to be a guide ONLY! There are some sections of the Diagnostic routine that allow the user to delete the firmware on the DVD ROM or to load a program, therefore please read EVERYTHING carefully before you proceed.
The Denso Touchscreen Sat Nav - Mondeo, Focus & S Max
There are only a few sites on the web that offer any kind of information relating to the Ford Touchscreen Sat Nav. It was introduced in July 2003 as a hi end option on most of the Mondeo, Focus and Galaxy Range. Information on it is sketchy at best, not a lot of dealers know anything about it which is also worrying if anything ever goes wrong.
There are some basic checks that you can do from home before an expensive trip to the dealer, but there are some risks involved. My best advice is DO NOT let your finger decide what to do, use your head and you wont erase all the data the system needs to boot up when you push the 'ON@ button.
I've rated some of the options on a scale from safe to very bad.
How do i access the Diagnostics?
Turn on the Ignition, power up the headunit and press the NAV button. Accept the warning. You should now be looking at a map screen. Press and hold the MENU button until you have a code entry screen appear.
Type in 842 520 then press enter.
Other Information
Press and hold the MENU button for 10 seconds until the unit beeps and displays the CODE ENTRY screen.
Type in 6414 and ENTER.
Gives you diagnostic functions for this unit.
IMPORTANT NOTE
DO NOT SELECT SOFTWARE UPDATE. I did this and froze the unit, need to goto Ford now to get them to sort it.
Hope this may be of use to some people
Your Privacy Choices