Registrations
We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.
If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum
Difference between revisions of "GloveBox Opening With Broken Handle"
Compuwiz uk (Talk | contribs) |
Compuwiz uk (Talk | contribs) |
||
| Line 30: | Line 30: | ||
this guide is still under construction, piccies will be added when i remember to take them | this guide is still under construction, piccies will be added when i remember to take them | ||
| − | |||
| − | + | == Tools Required == | |
| − | + | Suitable Spare Flat Pack Furniture Allen Key | |
| + | ( or other suitable small bent tool may do the trick ) | ||
| − | + | Patience as you probably wont get the right spot @ 1st | |
| + | |||
| + | |||
| + | == Task In Theory == | ||
| + | |||
| + | Basically use an allen key from an old flatpack furniture kit to open the glovebox by doing the same job that the handle normally does ie push the glovebox latch down to release the glovebox. | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | == Method == | ||
| + | |||
| + | === If you have a spare handle already awaiting fitting === | ||
| + | |||
| + | Pull hard enough on the handle to fully break it off. | ||
| + | |||
| + | then when the handle is fully out you can then ferret around in the gap @ the passenger side ( UK models ) & towards the back of the opening around half way down the opening you should be able to hook in the allen key or similar & pull down towards the floor which should release the glovebox as the following pictures show. | ||
| + | |||
| + | [[File:brokeopen1.jpg]] | ||
| + | [[File:brokeopen2.jpg]] | ||
| + | [[File:brokeopen3.jpg]] | ||
| + | [[File:brokeopen4.jpg]] | ||
| + | |||
| + | |||
| + | === If you are going to attempt to fix you current handle === | ||
| + | |||
| + | You may still be able to use the above method but without breaking the handle off 1st but access will be much harder etc | ||
| + | |||
| + | ( will probably involve plenty of foul language being uttered mind but could save you some pennies in the end ) | ||
Revision as of 11:59, 25 June 2011
For more information, visit the Ford Mondeo forum on TalkFord.com, the definitive resource site covering all Fords from the present day to the 1970's.
 Overview Guide | |
| Ford Model: | Mondeo |
|---|---|
| Petrol/Diesel: | ???? |
| Estimated Cost: | ???? |
| Difficulty? | ???? |
| How long does this take? | ???? |
this guide is still under construction, piccies will be added when i remember to take them
Contents
Tools Required
Suitable Spare Flat Pack Furniture Allen Key ( or other suitable small bent tool may do the trick )
Patience as you probably wont get the right spot @ 1st
Task In Theory
Basically use an allen key from an old flatpack furniture kit to open the glovebox by doing the same job that the handle normally does ie push the glovebox latch down to release the glovebox.
Method
If you have a spare handle already awaiting fitting
Pull hard enough on the handle to fully break it off.
then when the handle is fully out you can then ferret around in the gap @ the passenger side ( UK models ) & towards the back of the opening around half way down the opening you should be able to hook in the allen key or similar & pull down towards the floor which should release the glovebox as the following pictures show.
File:Brokeopen1.jpg File:Brokeopen2.jpg File:Brokeopen3.jpg File:Brokeopen4.jpg
If you are going to attempt to fix you current handle
You may still be able to use the above method but without breaking the handle off 1st but access will be much harder etc
( will probably involve plenty of foul language being uttered mind but could save you some pennies in the end )
Your Privacy Choices
