GloveBox Opening With Broken Handle

The Ford Mondeo hit our roads in 1993, and has consistently been a sales success. Now on its 4th incarnation, it remains a drivers favourite.
For more information, visit the Ford Mondeo forum on TalkFord.com, the definitive resource site covering all Fords from the present day to the 1970's.

---

Overview Guide
Ford Model:	Mondeo
Petrol/Diesel:	????
Estimated Cost:	????
Difficulty?	????
How long does this take?	????

this guide is still under construction, piccies will be added when i remember to take them

Tools Required

Suitable Spare Flat Pack Furniture Allen Key ( or other suitable small bent tool may do the trick )

Patience as you probably wont get the right spot @ 1st

Task In Theory

Basically use an allen key from an old flatpack furniture kit to open the glovebox by doing the same job that the handle normally does ie push the glovebox latch down to release the glovebox.

Method

If you have a spare handle already awaiting fitting

Pull hard enough on the handle to fully break it off.

then when the handle is fully out you can then ferret around in the gap @ the passenger side ( UK models ) & towards the back of the opening around half way down the opening you should be able to hook in the allen key or similar & pull down towards the floor which should release the glovebox as the following pictures show.

If you are going to attempt to fix you current handle

You may still be able to use the above method but without breaking the handle off 1st but access will be much harder etc

( will probably involve plenty of foul language being uttered mind but could save you some pennies in the end )