Registrations
We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.
If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum
Jaguar Flip Key
For more information, visit the Ford Mondeo forum on TalkFord.com, the definitive resource site covering all Fords from the present day to the 1970's.
Overview Guide | |
Ford Model: | Mondeo |
---|---|
Petrol/Diesel: | ??? |
Estimated Cost: | ??? |
Difficulty? | ??? |
How long does this take? | ??? |
Also see : Ford_Flip_Key
procedure is easy enough
start by splitting the fob into the top and bottom piece's
to use the key on a mk2 mondy the transponder in the top half needs to be changed to 1 from a mk2 mondy
u now need to cut along the bottom part (the part that sits flush with the bottom half, u NEED to cut this as the plastic has been welded, i used a dremel (other cutting tools are available )
u WILL need to glue this part back together again
u can now see the transponder this just lifts out to be relaced with the 1 from the mk2
next, tidy up the "cut" u performed to split the key in 2, this is essentail to ensure the key flips out smoothly
to remove the key you will see a hole with a "spring/clip", this needs to be removed in order to remove the key, i used a jewelers precision screwdriver to do this, with the pin removed, hold the key with pilers/molegrips and remove (it will be tight to ensure u've had ur wheatabix )
ur new key will (well mind did) need to be shortened, again use the dremel to ensure an good tight fit, i used some glue also to hold the key for extra security
reassembly is the above in the reverse
ps, if u need to change the battery
followed by
remove the screw and the battery is underneath
hope this helps atleast 1 person